Arsip Bulan, Juni 2011
LVM2 Howto
Physical volume, Volume group, and Logical volume. Hal yang pertamakali harus kita lakukan adalah inisialisasi disk yang akan digunakan sebagai Physical Volume disk Cari tahu disk dan partisi mana yang sedang digunakan oleh komputer dengan perintah: df -h Untuk melihat semua disk dan partisi yang terdapat di komputer kita dengan perintah: fdisk -l setelah kita [...]
Di Terbitkan Oleh Winston Sahusilawane Pada Rubrik Linux |
Citrix Behind IPTables
Setup: Internal users menggunakan SNAT untuk akses ke Internet eth0 is the inside network (LAN) eth1 is the outside network (Internet) UnAssign=1024:65535 is client port IP_OUTSIDE is the outside IP trying to access the Citrix server CTX_PORT=”1494″ is Citrix incomming port IP_Citrix=”ip.addr.citrix_int” is the Private IP of Citrix server (LAN) IP_EXT=”ip.addr.citrix_ext” is the Public IP [...]
Di Terbitkan Oleh Winston Sahusilawane Pada Rubrik Linux |
Cisco Router Firewall
Below you find a short description how to install and configure a CISCO 2603 Router / Firewall. In the example, we have two LAN’s using the private IP-addresses 192.168.102.0 and 192.168.101.0. Besides routing, the firewall translates all addresses from the internal LAN (192.168.102.0) to the external LAN (192.168.101.0) using NAT (Network Address Translation) and implements [...]
Di Terbitkan Oleh Winston Sahusilawane Pada Rubrik Cisco |
Cisco Recovery Password
This document describes the procedure for recovering enable password or enable secret passwords. These passwords are used to protect access to privileged EXEC and configuration modes. The enable password password can be recovered, but the enable secret password is encrypted and can only be replaced with a new password using the procedure below. This password [...]
Di Terbitkan Oleh Winston Sahusilawane Pada Rubrik Cisco |
Getting Started With Cisco
Initially you will probably configure your router from a terminal. If the router is already configured and at least one port is configured with an IP address, and it has a physical connection to the network, you might be able to telnet to the router and configure it across the network. If it is not [...]
Di Terbitkan Oleh Winston Sahusilawane Pada Rubrik Cisco |
